News

• 06

  2020.07

  Reasons for High Temperature of Cylindrical Roller Bearings

  The correct use and common faults of cylindrical roller bearings Cylindrical roller bearings are generally installed inside the mechanism, so it is inconvenient to check visually, only to make a rough judgment based on the fault phenomenon, and then disassemble and check. The correct use of cylindrical roller bearings is a reliable guarantee to reduce bearing failures and extend bearing life. Its contents include ...
• 03

  2020.07

  Elimination of Common Faults of Needle Roller Bearings

  Needle roller bearings are roller bearings with cylindrical rollers, which are commonly seen in automobiles or motorcycles in our daily life. Needle roller bearings cannot avoid some failures when they are used. Wuxi Spark Bearing Co., Ltd According to the understanding of needle roller bearings, tell you about some common fault factors of needle roller bearings and related methods to eliminate bearing faults. Commo...
• 02

  2020.07

  Maintenance of E Type Spherical Roller Bearings

  Wuxi Spark Bearing Co.,Ltd mainly deal with spherical roller bearings,today we share some information for E type spherical roller bearings E type spherical roller bearings can bear multi-direction force, high rotating speed and large bearing capacity.Symmetrical spherical roller, two quenched steel punch cage, inner ring without retaining edge and a center retainer guided by cage.The middle retainer near the outer ri...
• 01

  2020.07

  History And Development Of Bearings

  For centuries, man had to rely on his own power to pushor pull large objects over the earth. The concept of a bearing –to lessen friction between an object and the surface overwhich it is moved – is nearly as old as man himself. The first solution to relieving some of this sliding friction was recordedas early as 3,500 B.C. It was then that Mesopotamians were usingone of the first bearings known to man, an invention ...
• 30

  2020.06

  Vibration Temperature Causes Failure Analysis of Cylindrical Roller Bearing

  In the process of using cylindrical roller bearings, it can be said that the impact of vibration and temperature on cylindrical roller bearings is very large, let us first look at the impact of bearing vibration on cylindrical roller bearings. Vibration can be said to be quite sensitive to bearing damage, and flaking, indentation, rust, cracks, wear, etc. will be reflected in bearing vibration measurements. Therefore...
• 29

  2020.06

  The Meaning of Clearance for Spherical Roller Bearings

  The clearance of spherical roller bearings refers to the maximum distance that the inner and outer rings of the bearing can move without load, that is, when the bearing is not assembled in the shaft or bearing box, the inner ring or the outer ring is fixed. The amount of movement when moving the unfixed side in the radial or axial direction. According to its moving direction, the radial clearance is called radial clearance, ...
• 26

  2020.06

  Different Types of Installation of Needle Roller Bearings

  Needle roller bearings are roller bearings with cylindrical rollers. The rollers are both thin and long relative to their diameter. This type of roller is called a needle roller. According to the needle bearing model table query, needle roller bearings include: needle roller bearings without inner ring, needle roller bearings with inner ring, needle roller bearings with drawn outer ring and full complement needle roller bear...
• 25

  2020.06

  Why Choose WSBC Sealed Spherical Roller Bearing

  In many practical applications, the friction is halved, the speed is doubled, no longer lubrication is needed during the service life, and the maintenance cost is actually reduced.A novel seal design, code-named "CS", reduces total bearing friction by up to 20%.In a typical operation, a reduction in friction of around 20% would mean savings of up to 145 KWH per year.For a typical gearless tractor in a heavy lift, replacing t...
• 24

  2020.06

  Anti-rust Lubrication of Spark Bearings

  As a metal product, the bearing will inevitably produce rust. At this time, it needs to be properly maintained and rust-proof. Scientific and effective maintenance can greatly increase the service life of a bearing and can well reduce the failures during the use of machinery. Frequency is very helpful to daily production. Cleaning must select the appropriate method according to the nature of the surface of the anti...
• 22

  2020.06

  How to Install Split Spherical Roller Bearings

  Split roller bearings are mainly used for shafts supported by several points and positions that are difficult to access. Typical applications include transportation equipment, material handling equipment, ventilation equipment, steel rolling, shipbuilding and paper making. The installation of split spherical roller bearings is also an important part. Wuxi Spark Bearing Co., Ltd will share the knowledge about bearing insta...
• 19

  2020.06

  Replacement Steps of Separation Bearing of Cement Mixer

  The steps to replace the separation bearing of the cement mixer are as follows: 1. Remove the split fork guard (A) from the clutch housing (B) 2. With the aid of a vise, squeeze the spring (D) of the separation fork device, remove the separation fork (C) from the clutch housing (B), and remove the separation bearing (E). 3. Rotate the separation bearing by hand to check the bearing clearance. If the clear...
• 18

  2020.06

  The Function of WSBC Lock Nut

  Lock nut, is a kind of nut widely used in machinery and other industries, its working principle is the use of friction between nuts and bolts for self-locking.However, the reliability of self-locking will be reduced under dynamic load.On important occasions, we take precautions to ensure that the nuts are securely fastened. The working principle of nuts is to use the friction force between nuts and bolts for self-locki...
• 17

  2020.06

  Precautions For Using Spark Bearings

  As a precision spare part, the bearing has many points that need attention when it is installed and used. If it is a little careless, the bearing will malfunction or fail, so the user needs to pay attention to the following matters to make the bearing work better. Extend its service life. 1. Mechanical damage In severe cases, metal peeling and large-scale messy scratches occur on the touch surface; under normal...
• 16

  2020.06

  The protection and maintenance of rolling mill bearing

  Roll bearings are used to support the roll, compared with general purpose bearings; roll bearings have the following characteristics: 1 High pressure per unit Because dimensions of the bearing housing is limited, cannot be greater than the minimum diameter of the roll body, and the length of the roll neck is short, so it's unit load on the bearing is large. The unit pressure of general roll bearing can be up to 20...
• 15

  2020.06

  The Role and Use of Tapered Roller Bearings

  Tapered roller bearings mainly bear radial and axial combined loads. Bearing load capacity depends on the raceway angle of the outer ring, the greater the angle, the greater the load capacity. This type of bearing is a separate bearing. It is divided into single-row, double-row and four-row tapered roller bearings according to the number of rows of rolling elements in the bearing. The clearance of single-row tapered roller b...
• 12

  2020.06

  Features and Performance of Spherical Plain Bearings

  The joint bearings mainly include: angular contact joint bearings, thrust joint bearings, radial joint bearings, and stalk end joint bearings. The classification of joint bearings is mainly based on the direction, nominal contact angle and structural type that can bear the load. What are the characteristics of radial spherical plain bearings Spherical plain bearings can withstand larger loads. According to...
• 11

  2020.06

  WSBC High Temperature Bearings

  There are many kinds of high temperature bearing, according to different needs, different environments, can be installed in different types of bearing. WSBC high temperature bearings are widely used in metallurgy, furnace, glass, blast furnace, painting equipment and other high temperature operating machinery. General structure high temperature bearing: it mainly refers to the bearings designed according to the c...
• 10

  2020.06

  Cooling And Lubrication Of Turbocharger Bearings

  The turbocharging device that we usually say is actually an air compressor, which compresses air to increase the intake of the engine. Generally speaking, turbocharging uses the inertial impulse of exhaust gas discharged by the engine to push the turbine in the turbine room. In addition, the turbine drives the coaxial impeller, and the impeller pressurizes the air sent from the air cleaner pipe to make it pressurized into th...
• 09

  2020.06

  WSBC Roller Bearing

  Roller bearings are one of the rolling bearings and one of the widely used components in modern machinery. It relies on the rolling contact between the main components to support the rotating parts. Roller bearings are now mostly standardized. Roller bearings have the advantages of low torque required for starting, high rotation accuracy, and easy selection. Definition Rolling bearings are divided into ball bearin...
• 08

  2020.06

  The Basic Knowledge of Spherical Roller Bearings

  Definition of spherical roller bearings: The rolling elements are spherical bearings with spherical rollers. Spherical roller bearings have two rows of rollers, which mainly bear radial loads and can also withstand axial loads in either direction. There is a universal spherical raceway in the outer ring. The two inner ring raceways are inclined at an angle to the bearing center. The bearing is self-centering, so it i...
• 05

  2020.06

  Automotive Turbocharger Bearings

  All types of motor vehicles must meet increasingly stringent fuel consumption and environmental regulations. Therefore, driven by market demand, the size of turbocharged engines is continuously decreasing. In addition to diesel engines, gasoline engines in vehicles ranging from lightweight cars to heavy trucks are also equipped with turbochargers. We provide bearings for high-performance turbochargers, designed to meet the n...
• 04

  2020.06

  Characteristics of WSBC Eccentric Bearings

  Eccentric bearing is a very important bearing in cycloid needle gear reducer,Eccentric bearing is a very useful bearing type.It mainly includes the outer ring, the inner ring, the rolling basket and the rolling body. The eccentric bearing is simple in structure and easy to use. The eccentric function can be realized without the eccentric shaft, which reduces the manufacturing cost of the eccentric mechanism. Eccentric ...
• 03

  2020.06

  Understanding The Basic Structure Of WSBC Bearing Production

  Roller bearings developed on the basis of roller bearings, whose working principle is to replace sliding friction with rolling friction, generally consists of two ferrules, a group of rolling elements and a cage, which is very versatile, standardized and highly serialized Mechanical basic parts. Due to the different working conditions of various machines, various requirements are imposed on the rolling bearing in terms o...
• 02

  2020.06

  WSBC Excavator Bearings

  Excavator bearings include: excavator travel bearings, excavator slewing bearings, excavator needle bearings, excavator gearbox bearings, excavator travel motor bearings, excavator travel drive bearings, excavator articulated bearings, excavator slewing bearing and Inch non-standard bearings used on the excavator. Introduction Editor The installation and disassembly method of the excavator bearing should be deter...