News

News

  • 01
    2020.10

    The Difference between Deep Groove and angular Contact Ball Bearings

    Deep groove ball bearings, angular contact ball bearings are the typical rolling bearing, widely used can bear radial load and axial load, two-way is suitable for high speed rotation and requiring low noise, low vibration, steel plate with dust cover or rubber sealing ring seal type prefill the grease inside the bearing, outer ring snap ring or flange bearing axial positioning, easy and convenient for the installation of the...
  • 30
    2020.09

    What Caused WSBC Bearing Temperature To Rise

    High bearing temperature is a common and harmful hazard of rotating equipment, which will reduce the service life of bearings and increase maintenance costs. When the temperature rises rapidly and the temperature exceeds the standard, it is easy to cause the unit to be unplanned outage or load reduction The economic benefits have a great impact. Therefore, to quickly determine the cause of the failure and take appropriate me...
  • 29
    2020.09

    Knowledge Of WSBC Self-aligning Ball Bearings

    1. What is self-aligning ball bearing? The self-aligning ball bearing is in the middle of the outer side of the raceway surface of the inner hole box of the two dovetail guide rails, and is equipped with spherical steel balls. The diameter of the heart-adjusting function bearing and the nominal diameter of the bearing seat are curved surfaces, and each has an active heart-adjusting function, which can compensat...
  • 28
    2020.09

    Selection of bearing type

    When selecting a bearing type, it is important to fully understand the operating conditions of the bearing. Wuxi Spark Bearing Co.,Ltd make table lists the main analysis items: Analysis item selection method 1) Bearing installation space. Bearing type that can be accommodated in the bearing installation space. Because the rigidity and strength of the shaft are emphasized when designing the shaft system, the shaft...
  • 25
    2020.09

    The Material of Thrust Ball Bearing

    Thrust ball bearing is a common type of bearing, which is mainly composed of three parts: seat ring, shaft ring and steel ball retainer assembly. It must be recognized when choosing thrust ball bearing,Wuxi Spark Bearing Co.,Ltd tell everyone about the material analysis of thrust ball bearing, can let you further understand the thrust ball bearing, master the knowledge of thrust ball bearing, choose and buy more safe. ...
  • 24
    2020.09

    spiral bearing

    The spiral bearing is made of spring steel. The annealing temperature of spring steel is 3500C. Therefore, it has lower temperature sensitivity than ball bearing steel (100C6) with an annealing temperature of 1800C. Spiral bearing materials will extremely lose their hardness when the temperature reaches above the tempering temperature. Therefore, spring steel is more suitable for high temperature operation. Spring steel has ...
  • 23
    2020.09

    The Use And Testing Of WSBC Bearings

       The use factors of WSBC imported bearings mainly refer to whether the installation adjustment, use and maintenance, maintenance and repair meet the technical requirements. According to the technical requirements of WSBC imported bearing installation, use, maintenance and maintenance, the load, speed, working temperature, vibration, noise and lubrication conditions of the bearing in operation are monitored and checked. I...
  • 22
    2020.09

    Installation and adjustment

    1. Since high-speed bearing needs to meet the requirements of high-precision bearing and high-temperature bearing, the following two points should be taken into account when considering the mounting fit and clearance of high-speed bearing: (1) Change in size and hardness from room temperature to high temperature; (2) Changes in force system and shape caused by centrifugal force at high speed. In short, the choice o...
  • 21
    2020.09

    What are the factors that affect the service life of rolling bearings

    From the perspective of installation and maintenance of rolling bearings, there are many external factors that will affect the service life of the bearing, such as improper installation and improper maintenance. Wuxi Spark Bearing Co.,Ltd is here to share with you which of our common factors will affect the service life of bearings. 1. Analysis of installation factors For example: the installation of the gland of ...
  • 17
    2020.09

    Preloaded Way and Rotate Speed of Bearings

    Preloaded Way and Rotate Speed of Bearings are important,today Wuxi Spark Bearing Co.,Ltd will introduce something about it: There are two ways of bearing axial preload: one is constant pressure preload, the other is positioning preload.Under constant pressure preloading, the radial stiffness of the bearing increases slightly with the increase of rotating speed, while the axial and angular stiffness decreases rapidly.U...
  • 16
    2020.09

    Storage And Inspection Of WSBC Bearings

    WSBC rolling bearing is a kind of precision basic parts product. Proper storage and reasonable installation will definitely bring satisfactory results to your use. The bearing will affect and destroy the original quality of WSBC bearing due to pollution, corrosion, deformation and other factors, and it will not achieve your expected use effect. 1. Storage: WSBC bearings should not be exposed to the air. The storage...
  • 15
    2020.09

    Precautions When Using WSBC Bearings

    1. Selection of shaft and bearing and tolerance of control room Press-in bearings WSBC bearings should be flexible without blocks in the direction of rotation. If the rotation is significantly inflexible, the size of the shaft is too large. As the tolerance of the shaft is obviously "sandy" afterturning it by hand, it may be too poor or the roundness of the shaft. Therefore, a good shaft and bearing control roomshould a...
  • 14
    2020.09

    Heat Treatment Technology of Tapered Roller Bearing

    When the material of the tapered roller bearing is determined, the heat treatment technology is the key technology to determine the service life of the bearing. In the past ten years, the conventional heat treatment of bearings has developed rapidly, and the heat treatment of bearings with ordinary precision and general life can fully realize mass production. For a long time, the heat treatment of high-carbon chromium ...
  • 11
    2020.09

    Deformation of Cylindrical Roller Bearing Cage

    Cylindrical roller bearing copper alloy solid cage has compact structure, high strength, running performance and impact resistance are better than steel combined cage, it is a structure often used for high-speed, high-temperature and other high-performance bearings. In the cage structure design, in order to install the rollers into the cage and the ferrule (inner ring or outer ring), so that the three can form an inseparable...
  • 10
    2020.09

    Bearing Assembly Safety Production

    1. Safe production of bearing assembly Safety production is very important in rolling bearing assembly operation.In particular, the operator of the press must operate in accordance with the safety rules, in order to ensure personal safety and equipment in good condition.Pressure machinery in bearing assembly, especially eccentric press, has fast rotation speed, and the punch slider needs to pass through the lower dead po...
  • 09
    2020.09

    Cleaning And Installation Of WSBC Bearing

    Most of the newly bought WSBC bearings are coated with grease. These greases are mainly used to prevent WSBC bearings from rusting and do not provide lubrication. For example,WSBC 23030-2CS.Therefore, they must be thoroughly cleaned before they can be installed and used. The cleaning method is: all WSBC bearings sealed with anti-rust oil can be cleaned with gasoline or kerosene. For WSBC bearings that use heavy oil and anti-...
  • 08
    2020.09

    Maintenance and Maintenance of Cylindrical Roller Bearings

    In order to make the cylindrical roller bearing give full play to and maintain its due performance for a long time, the cylindrical roller bearing must be maintained regularly (regular inspection). Through appropriate regular inspections, it is very important to improve productivity and economy to detect faults early and prevent accidents before they occur. Disassemble The disassembly of the bearing is for reg...
  • 07
    2020.09

    Spherical Roller Bearing Fretting Damage Form

    1. Common forms of spherical roller bearing fretting damage In fact, the fretting state of spherical roller bearings is very complicated. Generally, according to the simplified plane contact model and according to different relative motion directions, fretting can be divided into four basic motion modes: tangential motion, radial motion, Rolling fretting, twisting fretting.In practice, the latter three types of frettin...
  • 04
    2020.09

    Brief History of Bearing Development

    The bearing is the support of the mechanical drive shaft and is an important guarantee for the performance, function and efficiency of the main engine. It is known as the "joint" of the machine. Its main function is to transmit force and movement and reduce friction loss. Don't think that such high-end devices are modern products. No, bearings have existed on the earth for 8,000 years. Bearings appear for...
  • 03
    2020.09

    Matching and Pretightening Technology of Angular Contact Bearings

    Under normal circumstances, the group of supporting contact ball bearing contact Angle is the same,When the axial load exceeds the rated requirement, some bearings will be unloaded, which will cause the ball to slip and cause early bearing failure. In order to avoid the unloading phenomenon (i.e., to improve the unloading force), the pre-load of the bearing group can be increased or the bearings with different contact ...
  • 02
    2020.09

    WSBC Bearing Inspection During Operation

    The inspection items of WSBC bearing during operation include rolling sound, vibration, temperature, lubrication state of the bearing, etc. The details are as follows: 1. The rolling sound of the bearing The sound meter is used to check the size and sound quality of the rolling sound of the bearing in operation.Even if the bearing is slightly damaged such as peeling, it will emit abnormal and irregular sounds, whi...
  • 01
    2020.09

    Features Of WSBC Deep Groove Ball Bearings

    Deep groove ball bearings have a simple structure and are easier to achieve higher manufacturing accuracy than other types. Therefore, they are easy to produce in series and have lower manufacturing costs, and they are extremely common. When a larger radial clearance is selected, the axial bearing capacity increases, and the contact angle is zero when bearing pure radial force. When there is an axial force, the contact ang...
  • 31
    2020.08

    Waviness and Noise of Tapered Roller Bearings

    Reducing bearing noise is an urgent problem to be solved in the bearing industry in improving bearing quality. The main factor affecting the noise of tapered roller bearings is the waviness of the bearing groove surface and the surface of the steel ball. Waviness is caused by vibration in the grinding process, so it is necessary to study the relationship between vibration and skin texture and the cause of vibration. T...
  • 28
    2020.08

    Reasons for Fracture of Cylindrical Roller Bearing Ring

    Cylindrical roller bearings are mostly used in medium-sized machinery. During their use, the fracture of the cylindrical roller bearing ring is also one of the common problems. Below Wuxi Spark Bearing Co., Ltd shared the reasons for the fracture of the cylindrical roller bearing ring. 1. Some macro reasons for the fracture of cylindrical roller bearing ring (1) The outer wall of the cylindrical roller b...

MAIN PROUDCUTS

TEL:+86 0510-83220817

FAX:+86 0510-83212137

Mail:sales@spark-bearing.com

Add:TIANYI BUILDING,HUISHAN DISTRICT ,WUXI CITY

Copyright © Wuxi Spark Bearings Co.,Ltd Co., Ltd All Rights Reserved. Sitemap
www.spark-bearing.com. Profession in Roller Bearings, Ball Bearings and Taper Toller Bearings-China Suppliers.