News

News

  • 30
    2021.06

    How To Solve The Problem Of WSBC Bearing Shaft Holding

    After WSBC bearing seizes the shaft, the reasons can be found from several aspects: (1) Whether there is oil leakage in the grinding head. (2) Whether the oil sump is short of oil, and whether the oil level is lower than the indication line on the oil mark. There is a kind of flat grinding lubricating oil which is prepared with kerosene, which is volatile. When the grinder is in normal use, the operator shoul...
  • 28
    2021.06

    How important of Heat Treatment for Tapered Roller Bearing

    When the material of the tapered roller bearing is determined, the heat treatment technology is the key technology to determine the service life of the bearing. In the past ten years, the conventional heat treatment of bearings has developed rapidly, and the heat treatment of bearings with ordinary precision and general life can fully realize mass production. For a long time, the heat treatment of high-carbon chromium ...
  • 24
    2021.06

    Common Cracking Morphology and Causes of Bearing Rings

    Bearing ring is one of the most important parts of bearing components. In the process of bearing use, bearing ring cracking and fracture are common forms of damage. Some bearings crack on the ring in the early use process, and some bearings fracture due to fatigue in the use process. 1.Macro morphology diagram and causes of cracking of outer ring of deep groove ball bearing Macro morphology diagram of bearing fra...
  • 23
    2021.06

    WSBC Bearing Quality Testing Standards

    First, if the structural design is reasonable and advanced, it will have a longer life of WSBC imported bearings. The manufacture of bearings generally involves multiple processing procedures such as forging, heat treatment, turning, grinding and assembly. The rationality, advancement and stability of each processing technology will also affect the life of the bearing. Among them, the heat treatment and grinding processes th...
  • 21
    2021.06

    How to Fit Tapered Roller Bearing Accuracy Design

    1. Tapered roller bearing system Under normal circumstances, the tapered roller bearing will use the base hole system when fitting, but if it is a standard part, the matching nature of the parts that match it is determined by the standard part. As for the tapered roller bearing, since it is a standard part, the part matching the outer ring is made of base shaft, and the shaft matching the inner ring is made of base hol...
  • 17
    2021.06

    The Best Solution for Heating When Bearings Are In Use

    High bearing temperature is a common and harmful fault of rotating equipment, which will reduce the service life of bearings and increase maintenance costs. When the temperature rises quickly and exceeds the standard, it is easy to lead to unplanned outage or load reduction operation of the unit, which has a great impact on economic benefits.Therefore, to quickly determine the cause of the failure and take appropriate measur...
  • 16
    2021.06

    Bearing Operation Inspection And Operation Attention

    The inspection items during operation include the rolling sound, vibration, temperature, lubrication status of imported bearings, etc. The details are as follows: 1. The rolling sound of imported bearings uses a sound meter to check the size and sound quality of the rolling sound of the bearing in operation. Even if the bearing is slightly damaged such as peeling, it will emit abnormal and irregular sounds. Distinguish...
  • 10
    2021.06

    Lubrication Mode and Installation Steps of Spindle Bearing

    Introduction to the functions of machine tool spindle bearings Machine tool spindle bearing is the spindle bearing of precision machine tools and similar equipment, which can guarantee the working accuracy and performance of precision machine tools. The correct configuration of spindle bearings refers to the combination of bearing types and the arrangement of front and rear bearings. The different configuration dete...
  • 09
    2021.06

    Detect The Tightness Of Bearing And Shaft Shoulder

    Testing method for tightness of rolling bearing and shaft shoulder Generally speaking, rolling bearings with tight fit interference installation must be close to the shaft shoulder. So how to test it? According to our company's knowledge of bearings, let's share the detection methods of the tightness of rolling bearings and shaft shoulders. I hope that it will be helpful to everyone's bearing install...
  • 07
    2021.06

    Bearing types and applications of WSBC bearings

    What are the types of bearings? There are different types of bearings specifically designed for applications depending on expected loads and the possibility of temperature fluctuations, contaminant exposure, and pressure. Today, WSBC bearing share some common bearing types application. T urbine bearings and slewing rings For example, look at wind turbine bearings and slewing rings. These componen...
  • 03
    2021.06

    Installation Procedure of Integral Eccentric Bearing

    The overall eccentric bearing is also known as eccentric bearing, refers to is a very useful bearing type, this bearing mainly includes outer ring, inner ring, rolling body flower basket, rolling body, eccentric bearing simple structure, easy to use, do not need an eccentric shaft can achieve eccentric function, reduce the manufacturing cost of the eccentric mechanism. The installation of the overall eccentric bearing...
  • 02
    2021.06

    Precautions For WSBC Bearing Installation

    Whether the WSBC bearing is installed correctly will directly affect the accuracy, life and performance of the bearing during use. Cleaning preparation before installation (1) When cleaning a large number of WSBC bearings, first use hot machine oil at a temperature of 90 ~ 100℃ to melt the encapsulating oil. At the same time, use a seamless and chip-free tool to dig out all the old oil, and then blanch it for ...
  • 31
    2021.05

    Why radial play and tolerance are not one and the same

    During the Second World War, in a munitions factory in Scotland, a little-known man by the name of Stanley Parker developed the concept of true position, or what we know today as Geometric Dimensioning & Tolerancing (GD&T). Parker noticed that even though some of the functional parts being manufactured for torpedoes were being rejected after inspection, they were still being sent on to production. Upon closer inspection,...
  • 27
    2021.05

    Causes And Analysis of Bearing Steel Ball Defect

    Bearing steel balls is an important part of the bearing structure. If there are defects in the steel ball, it will directly affect the performance of the bearing. Reasons for the defect of bearing steel ball blank ( 1 ) Defects in raw materials, such as material cracks; ( 2 ) the heating temperature is high and the speed is fast, and the temperature difference between inside and outside the forgi...
  • 26
    2021.05

    Measures To Reduce WSBC Bearing Failure

    1. Check the new bearings one by one The company uses new bearing shafts instead of overhauled bearings. There are not many quality problems in the bearings themselves, but they cannot be ruled out. The new bearings to be installed are inspected one by one, mainly to check the inner and outer rings, rollers, cages and rivets of the bearing for no bumps, deformation, looseness, rust and other defects. Once the defe...
  • 24
    2021.05

    Troubleshooting of WSBC Bearings

    What are the causes of WSBC bearing damage? There are many reasons for WSBC bearing damage. One of the common reasons is that the bearing is dirty and not clean. The typical dirt immersion period is during the initial installation process and during maintenance. Dirt leaks into the WSBC bearing housing through the air, or even through the use of dirty lubricant, enters the WSBC bearing.For example, hard and rough fo...
  • 20
    2021.05

    The Relationship Between Bearing Vibration and Noise

    What is bearing noise? Bearing noise is a problem often encountered in the process of manufacturing, testing and use of a motor. It is a very unscientific approach to simply talk about the problem of bearing. The problem should be analyzed and solved in accordance with the principle of correlation and from the perspective of coordination. Rolling bearings themselves usually do not produce noise. What is considere...
  • 19
    2021.05

    Causes Of Common Failures Of WSBC Motor Bearings

    Bearing, as one of the important parts of the motor, its performance will directly affect the normal operation of the locomotive. When the bearing is broken, damaged and sintered, it will seriously affect the driving safety of the locomotive. Therefore, the motor bearing is also very important for the locomotive. Based on the understanding of motor bearings, share common causes of motor bearings and corresponding control...
  • 13
    2021.05

    The Role of the Bearings Bushing

    The role of each part of the bearing The bearing is equivalent to the outer ring of the sliding bearing, the sleeve is integral, and the relative shaft is moving, and the bearing bush has some pieces, and the relative shaft is rotating. Journal: The part of a shaft that is supported by a bearing Sleeve: A sleeve formed in a complete cylindrical shape Plastic sleeve specifications: POM polyformaldehyde p...
  • 12
    2021.05

    Reduce The Influence Of External Factors On WSBC Bearings

       1. The impact of vibration on WSBC bearings.   In normal use, vibration is very sensitive to bearing damage, peeling, indentation, rust, cracks, wear, etc. will be reflected in the bearing vibration measurement. Therefore, by using a special bearing vibration measuring device (frequency analyzer, etc.), the magnitude of the vibration can be measured, and the specific abnormal situation cannot be inferred thro...
  • 10
    2021.05

    Common bearing types and applications

    There are different types of bearings specifically designed for applications depending on expected loads and the possibility of temperature fluctuations, contaminant exposure, and pressure. Today , WSBC bearing share some common bearing types application . For example, look at wind turbine bearings and slewing rings. These components may be as large as 2 m in diameter and are often required to handle hundreds of tons. ...
  • 06
    2021.05

    Spindle Double Row Cylindrical Rolling Bearing

    Double-row cylindrical roller bearings with tapered holes belong to linear contact bearings, whose bearing capacity and stiffness are higher than angular contact bearings with a point contact. They are often used in spindle systems of medium, large and heavy machine tools where the load is larger, the required stiffness is higher, and the speed is relatively not very high. 1. Selection of spindle rolling beari...
  • 29
    2021.04

    Bearing Heat Treatment

    Bearing Heat Treatment The heat treatment process mainly depends on their own practice, the heat treatment process should be combined with furnace type, furnace loading, cooling medium, workpiece size, workpiece shape and workpiece technical requirements and other factors related. 1. The annealing Operation method: the steel heating to AC3 +30~50 degrees or AC1 +30~50 degrees or below the temperature of AC1 ...
  • 28
    2021.04

    Several Methods Of WSBC Bearing Failure Judgment

    WSBC bearing fault diagnosis technology mainly includes vibration diagnosis technology, ferrograph diagnosis technology, temperature diagnosis technology, acoustic diagnosis technology, oil film resistance diagnosis technology and optical fiber monitoring and diagnosis technology, etc. Among them, vibration, iron shop and temperature diagnosis technology are used more. 1. Vibration diagnosis technology When the w...

MAIN PROUDCUTS

TEL:+86 0510-83220817

FAX:+86 0510-83212137

Mail:sales@spark-bearing.com

Add:TIANYI BUILDING,HUISHAN DISTRICT ,WUXI CITY

Copyright © Wuxi Spark Bearings Co.,Ltd Co., Ltd All Rights Reserved. Sitemap
www.spark-bearing.com. Profession in Roller Bearings, Ball Bearings and Taper Toller Bearings-China Suppliers.