Bearing Assembly Safety Production

Time：2020.09.10  Source：Roller Bearings Suppliers

1. Safe production of bearing assembly

Safety production is very important in rolling bearing assembly operation.In particular, the operator of the press must operate in accordance with the safety rules, in order to ensure personal safety and equipment in good condition.Pressure machinery in bearing assembly, especially eccentric press, has fast rotation speed, and the punch slider needs to pass through the lower dead point to reset, which is very dangerous.In the bearing assembly accident, the accident proportion of press is high, which should cause enough attention.There is always kerosene or gasoline in the bearing assembly room, fire prevention and fire prevention should always be vigilant.

Rules of safe operation for bearing assemblers

(1) Assembly workers shall receive safety education at all levels in the factory, 

earnestly implement the state policies, decrees and regulations on safe production and labor protection, and strictly observe the rules of safe operation and various safety rules and regulations.Need WSBC 22222-E1-K,click here to learn more.

(2) Assembly workers shall have safety operation certificate before taking up the post.All safety operation assessment failed, apprentices and interns, without permission not allowed to mount the post operation.

(3) When assembly workers are on duty, they must wear the labor insurance products neatly.Non-labor protection products, such as scarves and high heels, are strictly forbidden to be worn in case of accidents.

(4) The pressure machinery used for assembly shall have safety protection devices.For the adjustment of eccentric press, safety adjustment rules should be followed.During adjustment, the press slider should be stopped at the BDC position, then the bearing assembly mold should be pushed, and then the slider should be lowered to the required stroke.When the press is working, both hands should leave the bearing assembly mold, and the press slider is not allowed to run and work continuously.

(5) The electric riveter used for assembly shall work under safe voltage, and shall have grounding device and voltage limiting safety device.

(6) Operators without pressure workers or electric riveters and other special work certificates are not allowed to operate press machines, electric riveting machines and other equipment in the assembly personnel.

(7) In the process of sorting and matching, the bearing ring or semi-finished bearing with the rolling body shall not be placed too high and crowded, so as to avoid accidents.

(8) The bearing and its parts should be handled with care. In this way, on the one hand, the bearing surface can not be knocked and bruised, and on the other hand, the personal safety of the staff can be guaranteed.Click here to learn more about WSBC 22224-E1.

(9) When the bearings or their parts are cleaned by gasoline or kerosene, the use regulations and safety regulations of gasoline or kerosene should be followed to avoid fire accidents.

(10) The air in the assembly room is poor, especially in the operation under relatively closed conditions. The assembly workers should have appropriate rest time or activity time in the workshop.

(11) Emergency measures shall be taken in the assembly room. In case of accidents, workers shall evacuate from the work place in an orderly manner, count the personnel, and participate in rescue activities under unified command.

2. Civilized production of bearing assembly

Civilized production is also a very important content of factory management, which reflects the management level of a modern enterprise.It directly affects the quality of factory products, affect the operation and operation of machinery and equipment, affect the precision and life of the clamp and measuring tool, but also affect the operation skills of workers.Especially for the bearing assembly process of this kind of collective work occasions, workers in half manual, half mechanical, half mental and half physical conditions of operation, civilized production is crucial.

Wuxi Spark Bearing Co.,Ltd follows all above requirements to make sure safety and Civilized production.